![]() Spotlight Cam Solar Panel is designed to keep your battery charged and cannot power the Spotlight Cam on its own. Note: Make sure to charge and insert the included battery into your Spotlight Cam. Insert Spotlight Cam into the mounting bracket, set the desired angle, then tighten the adjustment screw. Plug the snap ring barrel charging cable into the power connector on Spotlight Cam.Route the charging cable from your Solar Panel into the power connector on Spotlight Cam.Plug the Solar Panel charging cable into the Spotlight Cam. Slide the mounting plate back into its slot on the back of the Spotlight Cam until it clicks into place.ħ.On the mounting plate, pop the rubber weatherproofing plug out of its hole.Then, slide the mounting plate out of its slot. Press the button on the back of the Spotlight Cam to open the battery compartment. ![]() You will need to remove the mounting plate on your Spotlight Cam, pop out the weatherproofing plug and then replace it. Note: If you'd like to adjust the angle of the solar panel for better sun coverage, loosen the adjustment screw on the mounting arm, set your desired angle, then re-tighten the screw. Slide the solar panel onto the mounting arm. Secure the mounting arm to the wall with the included screws. If you are mounting the bracket on wood or vinyl, just use the included screws.You may need to use a hammer to secure the anchors. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |